Barren or amphipod-dominated mobile sand shores

Summary

UK and Ireland classification

Description

Shores consisting of clean mobile sands (coarse, medium and some fine-grained), with little very fine sand, and no mud present. Shells and stones may occasionally be present on the surface. The sand may be duned or rippled as a result of wave action or tidal currents. The sands are non-cohesive, with low water retention, and thus subject to drying out between tides, especially on the upper shore and where the shore profile is steep. Most of these shores support a limited range of species, ranging from barren, highly mobile sands to more stable clean sands supporting communities of isopods, amphipods and a limited range of polychaetes. Species which can characterize mobile sand communities include Scolelepis squamataPontocrates arenariusBathyporeia pelagicaBathyporeia pilosa, Haustorius arenarius and Eurydice pulchra.

Mobile sand shores are typically situated along open stretches of coastline, with a relatively high degree of wave exposure. Bands of gravel and shingle may be present on the upper shore of exposed beaches. Where the wave exposure is less, and the shore profile more shallow, mobile sand communities may also be present on the upper part of the shore, with more stable fine sand communities present lower down. A strandline of talitrid amphipods (Tal) typically develops at the top of the shore where decaying seaweed accumulates. Mobile sand shores may show significant seasonal changes, with sediment accretion during calm summer periods and beach erosion during more stormy winter months. There may be a change in sediment particle size structure, with finer sediment grains washed out during winter months, leaving behind coarser sediments. (Information from Connor et al., 2004; JNCC, 2015).

Depth range

Strandline, Upper shore, Mid shore, Lower shore

Additional information

-

Listed By

Sensitivity reviewHow is sensitivity assessed?

Sensitivity characteristics of the habitat and relevant characteristic species

The biotope description and characterizing species are taken from JNCC (2015). The biotope group is characterized by clean mobile sands (coarse, medium and some fine-grained), with little very fine sand, and no mud present. The sands are mobile, retain little water and organic matter and dry out between tides, so that they support only a limited range of species.  Species which can characterize mobile sand communities include Scolelepis squamata, Pontocrates arenarius, Bathyporeia pelagica, Bathyporeia pilosa, Haustorius arenarius and Eurydice pulchra. The sensitivity assessments are  based on the abiotic (non-living) habitat which defines the biotope and the key characterizing amphipod, isopod and polychaetes.  

Resilience and recovery rates of habitat

This biotope is subject to high levels of abrasion resulting from sediment mobility. The species that are present (if any) are robust animals that can withstand some physical disturbance and/or recover rapidly, or migrate as adults into the biotope. The LS.LSa.MoSa.BarSa biotope is primarily identified by the type of the substratum rather than the biological community, which may be absent, or if present, occur in extremely low abundance. The mobile species that may be found in the LGS.BarSnd biotope occur throughout the littoral zone and are not dependent specifically on this biotope. Therefore the substratum type has been used primarily to indicate the sensitivity of this biotope and no species indicative of sensitivity were chosen.

Resilience assessment. As this biotope is characterized by the absence, rather then the presence of species, recovery is assessed as 'High' for any level of impact. The biotope would be considered to be sensitive to pressures that allowed the establishment of a permanent, species rich biological assemblage as low abundances and low species richness are characteristic of the biotope.

Hydrological Pressures

Use [show more] / [show less] to open/close text displayed

ResistanceResilienceSensitivity
Temperature increase (local) [Show more]

Temperature increase (local)

Benchmark. A 5°C increase in temperature for one month, or 2°C for one year. Further detail

Evidence

This biotope is characterized by the absence of species resulting from sediment mobility and abrasion (JNCC, 2015), rather than the presence of typical species: changes in temperature will therefore not alter the biotope (based on the abiotic habitat). Resistance to an increase in temperature is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Temperature decrease (local) [Show more]

Temperature decrease (local)

Benchmark. A 5°C decrease in temperature for one month, or 2°C for one year. Further detail

Evidence

This biotope is characterized by the absence of species resulting from sediment mobility and abrasion (JNCC, 2015), rather than the presence of typical species: changes in temperature will therefore not alter the biotope (based on the abiotic habitat). Resistance to a decrease in temperature is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Salinity increase (local) [Show more]

Salinity increase (local)

Benchmark. A increase in one MNCR salinity category above the usual range of the biotope or habitat. Further detail

Evidence

This biotope is characterized by the absence of species resulting from sediment mobility and abrasion (JNCC, 2015), rather than the presence of typical species: changes in salinity will therefore not alter the biotope (based on the abiotic habitat). Resistance to an increase in salinity is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Salinity decrease (local) [Show more]

Salinity decrease (local)

Benchmark. A decrease in one MNCR salinity category above the usual range of the biotope or habitat. Further detail

Evidence

This biotope is characterized by the absence of species resulting from sediment mobility and abrasion (JNCC, 2015), rather than the presence of typical species: changes in salinity will therefore not alter the biotope (based on the abiotic habitat). Resistance to a decrease in salinity is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
Low
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Water flow (tidal current) changes (local) [Show more]

Water flow (tidal current) changes (local)

Benchmark. A change in peak mean spring bed flow velocity of between 0.1 m/s to 0.2 m/s for more than one year. Further detail

Evidence

Changes in water flow at the pressure benchmark are considered unlikely to lead to alterations in the biotope as wave exposure would still result in sediment mobility, preventing the establishment of a more species rich biotope.  Resistance is therefore assessed as ‘High’ and resilience as ‘High’ (by default) so that the biotope is considered to be ‘Not sensitive’.  A reduction in water flow (coupled with reduced wave exposure) exceeding the pressure benchmark, could reduce sediment mobility and this may allow the establishment of a biotope such as LS.LSa.MoSa.AmSco.Sco or LS.LSa.MoSa.AmSco.Eur where finer sands were deposited.

High
Low
NR
NR
Help
High
High
High
High
Help
Not sensitive
Low
Low
Low
Help
Emergence regime changes [Show more]

Emergence regime changes

Benchmark.  1) A change in the time covered or not covered by the sea for a period of ≥1 year or 2) an increase in relative sea level or decrease in high water level for ≥1 year. Further detail

Evidence

This biotope occurs from the lower to upper shore and sediment mobility, rather than emergence, is a key factor preventing the establishment of a more species rich biotope.  An increase in the emergence period of this biotope would make it even more inhospitable to marine invertebrates. Where the biotope occurs in the supralittoral zone, a reduction in saline spray and splash may favour the colonization of terrestrial plants, which if able fully to establish will have a stabilising effect on the substratum. Consequently, this factor has the potential to alter the LGS.BarSnd biotope so that its starts to become another biotope. Similarly a decrease in emergence that led to this biotope becoming fully sublittoral would result in reclassification. The LGS.BarSnd biotope would not be recognized in either scenario and resistance has therefore been assessed as ‘Low’. On return to prior emergence regime sublittoral species that are intolerant of emergence and plants that may have colonized the substratum and which are intolerant to saline splash and spray will probably decline rapidly. Therefore resilience has been assessed as ‘High’. This biotope is therefore considered to have ‘Low’ sensitivity’ to changes in emergence. 

Low
Low
NR
NR
Help
High
Low
NR
NR
Help
Low
Low
Low
Low
Help
Wave exposure changes (local) [Show more]

Wave exposure changes (local)

Benchmark. A change in near shore significant wave height of >3% but <5% for more than one year. Further detail

Evidence

This biotope is found on shores that are judged to be moderately exposed, exposed or very exposed to wave action (JNCC, 2015). The presence of this biotope across these three categories is considered to indicate (by proxy) that increases or decreases in wave exposure at the pressure benchmark are unlikely to lead to alterations to the biotope.  Resistance is therefore assessed as ‘High’ and resilience as ‘High’ (by default) so that the biotope is considered to be ‘Not sensitive’.  A reduction in wave exposure (exceeding the pressure benchmark), could reduce sediment mobility and this may allow the establishment of a biotope such as LS.LSa.MoSa.AmSco.Pon or LS.LSa.MoSa.AmSco.Eur where finer sands were deposited.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help

Chemical Pressures

Use [show more] / [show less] to open/close text displayed

ResistanceResilienceSensitivity
Transition elements & organo-metal contamination [Show more]

Transition elements & organo-metal contamination

Benchmark. Exposure of marine species or habitat to one or more relevant contaminants via uncontrolled releases or incidental spills. Further detail

Evidence

This pressure is Not assessed but evidence is presented where available. As this biotope is characterized by the lack of species, exposure to contaminants will not result in significant impacts.

Not Assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Hydrocarbon & PAH contamination [Show more]

Hydrocarbon & PAH contamination

Benchmark. Exposure of marine species or habitat to one or more relevant contaminants via uncontrolled releases or incidental spills. Further detail

Evidence

This pressure is Not assessed but evidence is presented where available. As this biotope is characterized by the lack of species, exposure to contaminants will not result in significant impacts.

Not Assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Synthetic compound contamination [Show more]

Synthetic compound contamination

Benchmark. Exposure of marine species or habitat to one or more relevant contaminants via uncontrolled releases or incidental spills. Further detail

Evidence

This pressure is Not assessed but evidence is presented where available. As this biotope is characterized by the lack of species, exposure to contaminants will not result in significant impacts.

Not Assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Radionuclide contamination [Show more]

Radionuclide contamination

Benchmark. An increase in 10µGy/h above background levels. Further detail

Evidence

No evidence

No evidence (NEv)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
No evidence (NEv)
NR
NR
NR
Help
Introduction of other substances [Show more]

Introduction of other substances

Benchmark. Exposure of marine species or habitat to one or more relevant contaminants via uncontrolled releases or incidental spills. Further detail

Evidence

This pressure is Not assessed.

Not Assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
De-oxygenation [Show more]

De-oxygenation

Benchmark. Exposure to dissolved oxygen concentration of less than or equal to 2 mg/l for one week (a change from WFD poor status to bad status). Further detail

Evidence

As this biotope is characterized by the lack of species, de-oxygenation will not result in significant impacts. De-oxygenation is unlikely as this biotope is intertidal and exposure to air and tidal flushing is likely to recharge oxygen levels. Biotope resistance is therefore assessed as 'High', and resilience as 'High' (by default) and the biotope is considered to be 'Not sensitive'.

High
Low
NR
NR
Help
High
High
High
High
Help
Not sensitive
Low
Low
Low
Help
Nutrient enrichment [Show more]

Nutrient enrichment

Benchmark. Compliance with WFD criteria for good status. Further detail

Evidence

As this biotope is characterized by the lack of species present due to sediment mobility, nutrient enrichment will not result in significant impacts. Biotope resistance is therefore assessed as 'High', and resilience as 'High' (by default) and the biotope is considered to be 'Not sensitive'.

High
Low
NR
NR
Help
High
High
High
High
Help
Not sensitive
Low
Low
Low
Help
Organic enrichment [Show more]

Organic enrichment

Benchmark. A deposit of 100 gC/m2/yr. Further detail

Evidence

As this biotope is characterized by the lack of species, organic enrichment will not result in significant impacts. Organic deposits are likely to be removed rapidly by wave action although in periods of calm an organic deposit may be rapidly colonized by oligochaetes. Biotope resistance is assessed as 'High' as enrichment is likely to be very short-lived, and resilience as 'High' (by default), the biotope is considered to be 'Not sensitive'.

High
Low
NR
NR
Help
High
High
High
High
Help
Not sensitive
Low
Low
Low
Help

Physical Pressures

Use [show more] / [show less] to open/close text displayed

ResistanceResilienceSensitivity
Physical loss (to land or freshwater habitat) [Show more]

Physical loss (to land or freshwater habitat)

Benchmark. A permanent loss of existing saline habitat within the site. Further detail

Evidence

All marine habitats and benthic species are considered to have a resistance of ‘None’ to this pressure and to be unable to recover from a permanent loss of habitat (resilience is ‘Very Low’).  Sensitivity within the direct spatial footprint of this pressure is therefore ‘High’.  Although no specific evidence is described confidence in this assessment is ‘High’, due to the incontrovertible nature of this pressure.

None
High
High
High
Help
Very Low
High
High
High
Help
High
High
High
High
Help
Physical change (to another seabed type) [Show more]

Physical change (to another seabed type)

Benchmark. Permanent change from sedimentary or soft rock substrata to hard rock or artificial substrata or vice-versa. Further detail

Evidence

This biotope is characterized by coarse sands (JNCC, 2015). A change to a hard or artificial substratum would significantly alter the character of the biotope. The biotope is therefore considered to have 'No' resistance to this pressure (based on a change to a sediment habitat), recovery is assessed as 'Very low', as the change at the pressure benchmark is permanent. Biotope sensitivity is therefore assessed as 'High'.

None
High
Medium
NR
Help
Very Low
High
High
High
Help
High
High
Medium
Low
Help
Physical change (to another sediment type) [Show more]

Physical change (to another sediment type)

Benchmark. Permanent change in one Folk class (based on UK SeaMap simplified classification). Further detail

Evidence

The benchmark for this pressure refers to a change in one Folk class.  The pressure benchmark originally developed by Tillin et al., (2010) used the modified Folk triangle developed by Long (2006) which simplified sediment types into four categories: mud and sandy mud, sand and muddy sand, mixed sediments and coarse sediments.  The change referred to is therefore a change in sediment classification rather than a change in the finer-scale original Folk categories (Folk, 1954).  The change in one Folk class is considered to relate to a change in classification to adjacent categories in the modified Folk triangle.  For coarse sands a change in one folk class may refer to a change to gravels, mixed sediments or muddy sands, sandy muds and muds. A change in sediment type would result in reclassification of the biotope (JNCC, 2015) and a change to mixed or fine sediments would likely result in the establishment of a species rich and more diverse community (depending on other habitat factors). Biotope resistance is therefore assessed as ‘None’ and resilience as ‘Very low’ as the change at the pressure benchmark is permanent. Sensitivity is therefore ‘High’.

None
High
Medium
Low
Help
Very Low
High
High
High
Help
High
High
Medium
Low
Help
Habitat structure changes - removal of substratum (extraction) [Show more]

Habitat structure changes - removal of substratum (extraction)

Benchmark. The extraction of substratum to 30 cm (where substratum includes sediments and soft rock but excludes hard bedrock). Further detail

Evidence

The process of extraction will remove the abiotic habitat; therefore a resistance of ‘None’ is recorded. As the coarse sands are mobile where small areas are impacted infilling is likely to be rapid following sediment redistribution by wave action. For instance, at Village Bay on St Kilda, an island group far out into the Atlantic west of Britain, an expanse of sandy beach was removed offshore as a result of winter storms to reveal an underlying rocky shore (Scott, 1960). Yet in the following summer the beach was gradually replaced when wave action was less severe. In view of such observations, that many sandy beaches disappear in winter and reappear in spring, it is likely that recovery would occur in less than a year or six months.  As a result, resilience is assessed as ‘High’, and sensitivity as ‘Medium’.  Recovery where large volumes of sand are removed over wide areas may lead to slower recovery if sediments are not available and/or water transport is limited. 

None
High
Low
NR
Help
High
Low
NR
NR
Help
Medium
Low
Low
Low
Help
Abrasion / disturbance of the surface of the substratum or seabed [Show more]

Abrasion / disturbance of the surface of the substratum or seabed

Benchmark. Damage to surface features (e.g. species and physical structures within the habitat). Further detail

Evidence

This biotope is characterized by the absence of species through sediment mobility (JNCC, 2015), rather than the presence of typical species: abrasion will therefore not alter biotope character. The highly mobile species present occasionally in this biotope may only be found in extremely low abundance and are not specifically dependent on this biotope. Resistance to this pressure is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Penetration or disturbance of the substratum subsurface [Show more]

Penetration or disturbance of the substratum subsurface

Benchmark. Damage to sub-surface features (e.g. species and physical structures within the habitat). Further detail

Evidence

This biotope is characterized by the absence of species through sediment mobility (JNCC, 2015), rather than the presence of typical species: abrasion will therefore not alter biotope character. The highly mobile species present occasionally in this biotope may only be found in extremely low abundance and are not specifically dependent on this biotope Resistance to this pressure is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Changes in suspended solids (water clarity) [Show more]

Changes in suspended solids (water clarity)

Benchmark. A change in one rank on the WFD (Water Framework Directive) scale e.g. from clear to intermediate for one year. Further detail

Evidence

This biotope occurs in scoured habitats and it is likely, depending on local sediment supply, that the biotope is exposed to chronic or intermittent episodes of high-levels of suspended solids as local sediments are re-mobilised and transported. This biotope is characterized by the absence of species through sediment mobility (JNCC, 2015), rather than the presence of typical species: changes in suspended solids will therefore not alter the biotope. Resistance to an increase or decrease in suspended solids is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Smothering and siltation rate changes (light) [Show more]

Smothering and siltation rate changes (light)

Benchmark. ‘Light’ deposition of up to 5 cm of fine material added to the seabed in a single discrete event. Further detail

Evidence

This biotope is characterized by the absence of species through sediment mobility (JNCC, 2015), rather than the presence of typical species: the addition of a single deposit of fine sediments which will be removed by wave action will therefore not alter the biotope. Resistance to this pressure is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Smothering and siltation rate changes (heavy) [Show more]

Smothering and siltation rate changes (heavy)

Benchmark. ‘Heavy’ deposition of up to 30 cm of fine material added to the seabed in a single discrete event. Further detail

Evidence

This biotope is characterized by the absence of species through sediment mobility (JNCC, 2015), rather than the presence of typical species: the addition of a single deposit of fine sediments which will be removed by wave action will therefore not alter the biotope. Resistance to this pressure is therefore assessed as 'High' and resilience as ‘High’ (by default) and this biotope is considered to be 'Not sensitive'.

High
High
Medium
NR
Help
High
High
High
High
Help
Not sensitive
High
Medium
Low
Help
Litter [Show more]

Litter

Benchmark. The introduction of man-made objects able to cause physical harm (surface, water column, seafloor or strandline). Further detail

Evidence

Not assessed.

Not Assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Not assessed (NA)
NR
NR
NR
Help
Electromagnetic changes [Show more]

Electromagnetic changes

Benchmark. A local electric field of 1 V/m or a local magnetic field of 10 µT. Further detail

Evidence

No evidence

No evidence (NEv)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
No evidence (NEv)
NR
NR
NR
Help
Underwater noise changes [Show more]

Underwater noise changes

Benchmark. MSFD indicator levels (SEL or peak SPL) exceeded for 20% of days in a calendar year. Further detail

Evidence

Not relevant.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Introduction of light or shading [Show more]

Introduction of light or shading

Benchmark. A change in incident light via anthropogenic means. Further detail

Evidence

Not relevant.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Barrier to species movement [Show more]

Barrier to species movement

Benchmark. A permanent or temporary barrier to species movement over ≥50% of water body width or a 10% change in tidal excursion. Further detail

Evidence

Not relevant.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Death or injury by collision [Show more]

Death or injury by collision

Benchmark. Injury or mortality from collisions of biota with both static or moving structures due to 0.1% of tidal volume on an average tide, passing through an artificial structure. Further detail

Evidence

Not relevant’ to seabed habitats.  NB. Collision by grounding vessels is addressed under surface abrasion.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Visual disturbance [Show more]

Visual disturbance

Benchmark. The daily duration of transient visual cues exceeds 10% of the period of site occupancy by the feature. Further detail

Evidence

Not relevant.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help

Biological Pressures

Use [show more] / [show less] to open/close text displayed

ResistanceResilienceSensitivity
Genetic modification & translocation of indigenous species [Show more]

Genetic modification & translocation of indigenous species

Benchmark. Translocation of indigenous species or the introduction of genetically modified or genetically different populations of indigenous species that may result in changes in the genetic structure of local populations, hybridization, or change in community structure. Further detail

Evidence

This biotope is not characterized by any typical species, those that are present, such as Bathyporeia spp.  are not translocated and this pressure is therefore considered 'Not relevant'.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Introduction or spread of invasive non-indigenous species [Show more]

Introduction or spread of invasive non-indigenous species

Benchmark. The introduction of one or more invasive non-indigenous species (INIS). Further detail

Evidence

The high levels of abrasion resulting from movement of coarse sands and the subsequent sediment instability will limit establishment of all but the most highly scour resistant invasive non-indigenous species (INIS) and no direct evidence was found for effects of INIS on this biotope.  The low levels of water and organic matter retained by this biotope, are considered to additionally inhibit permanent colonization by invasive species.

Sensitivity assessment. Overall, there is no evidence of this biotope being adversely affected by non-native species. Resistance is therefore assessed as 'High', and resilience as 'High' (by default), and the biotope is considered to be 'Not sensitive'.

High
Low
NR
NR
Help
High
High
High
High
Help
Not sensitive
Low
Low
Low
Help
Introduction of microbial pathogens [Show more]

Introduction of microbial pathogens

Benchmark. The introduction of relevant microbial pathogens or metazoan disease vectors to an area where they are currently not present (e.g. Martelia refringens and Bonamia, Avian influenza virus, viral Haemorrhagic Septicaemia virus). Further detail

Evidence

As this biotope is characterized by the absence of a biological assemblage apart from occasional and ephemeral presence of Bathyporeia spp. this pressure is considered to be 'Not relevant'.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Removal of target species [Show more]

Removal of target species

Benchmark. Removal of species targeted by fishery, shellfishery or harvesting at a commercial or recreational scale. Further detail

Evidence

As this biotope is characterized by the absence of a biological assemblage apart from occasional and ephemeral presence of Bathyporeia spp. this pressure is considered to be 'Not relevant'.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Removal of non-target species [Show more]

Removal of non-target species

Benchmark. Removal of features or incidental non-targeted catch (by-catch) through targeted fishery, shellfishery or harvesting at a commercial or recreational scale. Further detail

Evidence

As this biotope is characterized by the absence of a biological assemblage apart from occasional and ephemeral presence of Bathyporeia spp. this pressure is considered to be 'Not relevant'.

Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help
Not relevant (NR)
NR
NR
NR
Help

Bibliography

  1. Bird, E.C.F., 1983. Factors influencing beach and accretion: a global review. In Sandy beaches as ecosystems(ed. A. McLachlan & T. Erasmus), pp. 709-717. The Hague: Dr W. Junk Publishers.

  2. Connor, D.W., Allen, J.H., Golding, N., Howell, K.L., Lieberknecht, L.M., Northen, K.O. & Reker, J.B., 2004. The Marine Habitat Classification for Britain and Ireland. Version 04.05. ISBN 1 861 07561 8. In JNCC (2015), The Marine Habitat Classification for Britain and Ireland Version 15.03. [2019-07-24]. Joint Nature Conservation Committee, Peterborough. Available from https://mhc.jncc.gov.uk/

  3. Connor, D.W., Brazier, D.P., Hill, T.O., & Northen, K.O., 1997b. Marine biotope classification for Britain and Ireland. Vol. 1. Littoral biotopes. Joint Nature Conservation Committee, Peterborough, JNCC Report no. 229, Version 97.06., Joint Nature Conservation Committee, Peterborough, JNCC Report No. 230, Version 97.06.

  4. Fish, J.D. & Fish, S., 1996. A student's guide to the seashore. Cambridge: Cambridge University Press.

  5. Fish, J.D. & Preece, G.S., 1970. The annual reproductive patterns of Bathyporeia pilosa and Bathyporeia pelagica (Crustacea: Amphipoda). Journal of the Marine Biological Association of the United Kingdom, 50, 475-488.

  6. Fish, S., 1970. The biology of Eurydice pulchra (Crustacea: Isopoda). Journal of the Marine Biological Association of the United Kingdom, 50, 753-768.

  7. Hayward, P.J. 1994. Animals of sandy shores. Slough, England: The Richmond Publishing Co. Ltd. [Naturalists' Handbook 21.]

  8. JNCC (Joint Nature Conservation Committee), 2022.  The Marine Habitat Classification for Britain and Ireland Version 22.04. [Date accessed]. Available from: https://mhc.jncc.gov.uk/

  9. JNCC (Joint Nature Conservation Committee), 2022.  The Marine Habitat Classification for Britain and Ireland Version 22.04. [Date accessed]. Available from: https://mhc.jncc.gov.uk/

  10. JNCC (Joint Nature Conservation Committee), 1999. Marine Environment Resource Mapping And Information Database (MERMAID): Marine Nature Conservation Review Survey Database. [on-line] http://www.jncc.gov.uk/mermaid

  11. Jones, D.A., 1970. Population densities and breeding in Eurydice pulchra and Eurydice affinis in Britain. Journal of the Marine Biological Association of the United Kingdom, 50, 635-655.

  12. Long, D., 2006. BGS detailed explanation of seabed sediment modified Folk classification. Available from: http://www.emodnet-seabedhabitats.eu/PDF/GMHM3_Detailed_explanation_of_seabed_sediment_classification.pdf

  13. McLachlan, A., 1983. Sandy beach ecology - a review. In Sandy beaches as ecosystems (ed. A. McLachlan & T. Erasmus), pp.321-381. The Hague: Dr W. Junk Publishers.

  14. Peterson, C.H., 1991. Intertidal zonation of marine invertebrates in sand and mud. American Scientist, 79, 236-249.

  15. Scott, A., 1960. The fauna of the sandy beach, Village Bay, St. Kilda. A dynamical relationship. Oikos, 11, 153-160.

Citation

This review can be cited as:

Tillin, H.M. 2018. Barren or amphipod-dominated mobile sand shores. In Tyler-Walters H. Marine Life Information Network: Biology and Sensitivity Key Information Reviews, [on-line]. Plymouth: Marine Biological Association of the United Kingdom. [cited 25-11-2024]. Available from: https://marlin.ac.uk/habitat/detail/343

 Download PDF version


Last Updated: 08/03/2018